Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 26.06.2025 10:13

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

These are simplified answers to the original question, and does not change anything I wrote above.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

2024–10–10[John johnson John Johnson ]

36 Wildly Entitled People From This Month Who Might As Well Have Just Screamed "It's All About ME!" - BuzzFeed

Here is a simplified AC power diagram.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

Why are white guys the top consumers of interracial porn? What's the rationale behind this phenomenon?

a photo is worth a thousand words.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

Can the fuse protect the electronic devices from lightning instead of a surge protector.

"Which K-pop idols do you find breathtakingly beautiful?"

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

There are two important concepts here.

Can I fix a fridge leak myself, or should I call a pro?

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Now when you have a certain ac resistance, then a current flows in a loop.

I dreamt my mother had died and I cried so much in my dream. What does it mean?

These devices are installed between the “hot” and “neutral” and protective ground.

One

An AC voltage/ current source, and an ac inductive load.

Where can I get sure fixed matches on Instagram?

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

This device then solves the entire problem.

(Dc diagram shown, AC is similar).

Panthers-Oilers Game 3 ends in chaos as Florida takes series lead in Stanley Cup Final - New York Post

For this case there are devices called Metal oxide varistors (MOV).

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

There are three different concepts here that are getting confused.

James Webb Detects Never-Before-Seen Molecule on Scorching Exoplanet - The Daily Galaxy

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

At least they know the answer if they wanted it.

At one ohm, the resistor has a maximum of 1 watt power.

Scientists Warn: Long Work Hours May Physically Alter Your Brain - SciTechDaily

but I think this circuit , shows a few more pieces.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Barnstars:

Merab Dvalishvili expected a different Sean O'Malley at UFC 316 after ex-champ 'made so many excuses' - Yahoo Sports

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

the problem then depends on "how fast does the fuse operate?".

One is “what exactly is in a ‘surge protector’ ? ”

Vera Rubin quarter coin released by US Mint - BBC Sky at Night Magazine

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

eight

Has the time come for Ukraine to come to terms with Russia since the situation on the battlefield is clearly hopeless at this point?

What does a fuse do?

A circuit breaker is similar, but is resettable.

what exactly is a ‘surge’ protector?

7 storylines to watch with All-Star voting underway - MLB.com

A fuse is a non-resetable over current circuit protector.

2024–10–16 [ OO OLAOYE OYEBODE ]

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

2 women diagnosed with colon cancer in their 30s share their symptoms that were missed - Business Insider

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

The third is lightning and “how it gets conducted into a home.”

Why do some men love sucking cocks?

He then describes the function of a fuse.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

It seems Mohan does not understand the difference between a comment and an Answer.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

He then describes Rainy Season and Lightning.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

This one hit behind the barn.

This is where the MOV conducts again, and dissipated the energy.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

The bolt then partially travels down the line to your home.

This is 'the assistant's answer'

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

[old diagram got deleted by accident]

Upvotes:

But it can get overloaded, and no longer works.

So, the voltage could go up to 500 volts, and the fuse will not open up.

The MOV will conduct when the voltage exceeds 50% of line voltage.

The other is “what does a “fuse” do?”

What is lightning?

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

I post the exact comment here.

2024–10–14 [Omar Gharbi Omar Gharbi ]

[image of Common-mode choke]

but this device (an Inductor) … impedes the rapid changes in the current.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

This is where this question deviates from being a 'generic' question, and becomes more specific.

nine

Edit 2024–10.

But… the neutral is now “floating” because of the 1 ohm resistance.

First Sentence:

so, what happens?

Because the load is inductive, the current lags the voltage.(by a bit).

He then asserts :

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

It also is a device that limits the change in current flow.

In schematic diagrams this is the symbol for a fuse: